Rodgers 990 Output Channels

Rodgers 990 Output Channels

Tom,

Thanks for the information. That is even better that what I was hoping for. It sounds like I should be easily able to connect into a PA amp I have.

The organ is about 300 miles away and I haven't had a chance to see it yet. I'm hoping to inspect it next week some time.

Best regards,
Andy Hall

[twnelson]

A 'stock' 990 will have 5 line-level outputs accessible on the Output Panel inside the back of the organ. There are also switches on the output mixer/level PCB immediately above the panel that will mix the outputs down to 3 channels. There were options for the 990s that could add a couple more channels.

The outputs are compatible with typical commercial audio gear (I use Behringer equipment on my 660, a cut-down 990), so you shouldn't have any problems connecting to a mixer. The audio signal appears between pins 1 & 5 of the AMP connectors.

Just be careful what you route the pedal channel to :-).

--- Tom

Can anyone tell me what kind of output channels (and how many) I would find on a Rodgers model 990? I may have a line on one that has been separated from it's speakers and I am wondering if I could connect the output channels into an audio mixer for the purposes of checking it out.

Best regards,
Andy Hall