Forum Top Banner Ad

Collapse

Ebay Classic organs

Collapse

Announcement

Collapse
No announcement yet.

Allen Organ T-15A

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Allen Organ T-15A



    Hello,</p>

      I've just bought an Allen Organ T-15A, and after playing around with it, wondered if there are any possibilities of changing the various sounds (stops)?  I think it's from the 1970's and is in great condition, being newly restored.  I do like it, but was wondering if there are any 'additions' possible.</p>

    Thanks,</p>

     </p>

    HL </p>

  • #2
    Re: Allen Organ T-15A



    Without seeing a picture, I am not much help . </p>

    </p>

    James.</p>

    Comment


    • #3
      Re: Allen Organ T-15A



      Being new to the Allen organ, having only ever played church pipe organs, then what would you need a picture off?  I don't have the manual for it and have tried finding one online.  I was curious about if it would be possible to run the sound out to a stereo, for instance, or to create some fullness, reverberation.  It's in a small room, so it can sound a bit 'cut off'.</p>

       Thanks,</p>

      HL </p>

      Comment


      • #4
        Re: Allen Organ T-15A



        This is an analogue organ as I recall. I'm not a technician but I can say with some degree of certainty that it is not possible to substitute the stops on your organ for alternative ones.</p>

        The Allen MOS and ADC digital organs had a card reader which enable to insert a card into a slot and assign it to a blank stop. Nowadays with the Renaissance and Quantum Renaissance models, you simply call the tech out and a computer is plugged in the stop changed for something else for a small cost.
        </p>
        1971 Allen Organ TC-3S (#42904) w/sequential capture system.
        Speakers: x1 Model 100 Gyro, x1 Model 105 & x3 Model 108.

        Comment


        • #5
          Re: Allen Organ T-15A



          It uses one set of sine wave (flute) generators, but Allen derived a few additional voices at 8' on the swell.  Those added voices are on a separate channel so feeding them through a separate amplifier and speaker would help.  Also, altering the pitch of one of the two channels would improve the chorus effect on the swell.</p>

          Beyond that, it would be pushing the capabilities of an organ with one generator, princess pedalboard, etc. </p>

          Comment


          • #6
            Re: Allen Organ T-15A



            [quote user="two_larsens"] I was curious about if it would be possible to run the sound out to a stereo, for instance, or to create some fullness, reverberation. It's in a small room, so it can sound a bit 'cut off'. [/quote]</P>


            If you have no reverb, then a Lexicon MX 200 would be a useful addition. See:</P>


            http://www.lexiconpro.com/ProductPortal.aspx</P>


            The unit only runs $200; and is commonly used by various organ manufacturers. I have a Lexicon 400 in my organ, which provides forsurround sound processing, with thetwo rear speakers at the back of the room providing primarily reverb support. A cheap amplifier and speakers are good enough for this function. While the MX 200 is agreat reverb processor, I don't think it supports surround sound like the 400.</P>
            <P mce_keep="true"></P>
            2008: Phoenix III/44

            Comment


            • #7
              Re: Allen Organ T-15A



              If I were to get a Lexicon MX 200, then is it do-able to hook up, or does it require so 'editing' of the wiring inside the instrument?</p>

               </p>

              Thanks, </p>

              HL </p>

              Comment


              • #8
                Re: Allen Organ T-15A



                [quote user="two_larsens"] If I were to get a Lexicon MX 200, then is it do-able to hook up, or does it require so 'editing' of the wiring inside the instrument? [/quote]</P>


                I have to admit, I did all this stuff the easy way; with the MX 400 surround-sound reverb stuff already incorporatedin my new Phoenix organ. [:$]So I'm hoping someone can provide some aftermarket experience with Lexicon units.</P>


                Lexicon has detailed owners'manuals available online. And if my recollection is correct, they provide every kind of input/output imaginable, including unbalanced, balanced, and digital input/output. For your setup, I would assume that installation involves little beyond inserting the Lexicon unit via RCA jacks between the preamp and the amp; but I can't offer you a money-back guarantee on that. Lexicons areoften used as an essential part ofon-stage instrumental ensembles, so they are really very versatile.</P>


                If no oneelse here can provide the info you need, then as alast resort, you might try writing to[email protected]. as a non-customer. For sure, they are quite familiar with Lexicon units; and tend to be very helpful and accomodating. If you don'tget an immediate response, that generally means that they are far away from home doing an installationsomewhere.</P>


                Even geeeeetar rock bands use Lexicon units; so they can't be all that complex!</P>
                2008: Phoenix III/44

                Comment

                Working...
                X