Tweet
Can someone explain to me how this mixer could be the organ preamp on a CV?
-
-
The two wires from the matching transformer(red/black) enter the rheostat box from the right.That is your 'pre' expression high impedance signal.
The two wires leaving the expression/rheo box to the preamp? Are 'post' expression high impedance! That's what you are looking for.
Now you know where the send/return is. Getting it to loop? No problem inserting a mixer. The BCV at the shop sure sounds purdy through a Midas aux or matrix!A100/251 A100/147 A102/222 B2/142 BV/147 BCV/145 M3/145 M102/145 M111/770 L101/760 T222/HL722 M111/770 no B3/C3! -
Of course, this approach means you'll have to do without scanner vibrato.Current organs: AV, M-3, A-100
Current Leslies: 22H, 122, 770Comment
-
Ok thanks, I have a BV I want to try out. The church I play for has the CV done that way and it SCREAMSComment
-
Why not rebuid the stock preamp? Full functionality, AND it will scream...Current organs: AV, M-3, A-100
Current Leslies: 22H, 122, 770Comment
-
Originally posted by enor View Post
Enor is right IMO.Rebuild the preamp to get the scanner + tone AND you can still 'insert' a mixer! You can do both.
I split the post rheo signal with an A/AB box.With a Neo Ventilator run through an aux it's pretty dang close to a 122!
I don't like what tremelo does to harmonic percussion so a non rotary channel is a must!Stop works just fine for me.A100/251 A100/147 A102/222 B2/142 BV/147 BCV/145 M3/145 M102/145 M111/770 L101/760 T222/HL722 M111/770 no B3/C3!Comment
Comment