Hammmond Concorde 2300

[swfrx]

I have a Concorde with some minor issues. Overall, the organ does good. The poly-synthesis percussion doesn't work on F# through B on each octave and the A above middle C doesn't have the reverb on the piano tab. I was in a cleaning mode and was cleaning some of the connectors and I don't know if I have one of the connectors offset in the wrong position. I now some of the connectors that plug straight down are offset. As far as the piano tab not having the reverb on the one note, I do have a piano filter board that I tried and it had no effect on it. I should have made pictures of the connectors before I pulled them. Any help would be appreciated.

thanks

[Bill McIntyre]

Check and clean the edge connectors on the Bright Wave Percussion boards, These are the two large boards with IC's in the center under the manuals. I had several "missing hammers" on the "piano" which were restored after I replaced corroded pins in these connectors.