Ebay Classic organs

Collapse

Announcement

Collapse
No announcement yet.

L122 soft, brightness and reverb tabs not working

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • L122 soft, brightness and reverb tabs not working

    Hi there, the issue is as per the subject line.
    I’ve had a look at the molex connector that appears to connect these switches to the vibrato amp, it doesn’t look dirty or anything.

    Any ideas?

  • #2
    Hello,

    Check that the red wire of the Reverb switch cable is not cut somewhere.
    Both ends : Molex connector on amp and lower lugs of the reverb tabs.

    JP

    Click image for larger version  Name:	L122.jpg Views:	0 Size:	29.8 KB ID:	734124

    Comment


    • #3
      Originally posted by Jyvoipabo View Post
      Hello,

      Check that the red wire of the Reverb switch cable is not cut somewhere.
      Both ends : Molex connector on amp and lower lugs of the reverb tabs.

      JP

      Click image for larger version Name:	L122.jpg Views:	0 Size:	29.8 KB ID:	734124
      Thanks for the suggestion. I haven’t had a chance to look, but I will. Thanks again, much appreciated.

      Comment


      • #4
        Originally posted by Jyvoipabo View Post
        Hello,

        Check that the red wire of the Reverb switch cable is not cut somewhere.
        Both ends : Molex connector on amp and lower lugs of the reverb tabs.

        JP
        Hi again

        I finally had a chance to look at this properly. Well all I had to do was unplug and replug that Molex connector on the amp, and the switches are back in business.
        Thank you for your help.

        Andy

        Comment

        Working...
        X