Tweet
Can somebody tell me the configuration for a cable to connect an A-102 to a PR40?</p>
Roy
</p>
-
Can somebody tell me the configuration for a cable to connect an A-102 to a PR40?</p>
Roy
</p>Roy E. Knight, DMA
Hauptwerk 4-manual digital
Hammond B-3, Leslie 122, PR-40
Hammond A-102, Leslie 125, PR-40
Church; Cassavant 3-manual, 70 rank -
Re: Cable for A-102 to PR40
Hi Roy,</P>
Looks like Chris on the Zone has come up with the necessary info. I have a half share in a C3 with a PR40 but I haven't looked up which pin is which, because it was already working as the stock C3 tone cabinet and cable.</P>
Let us know How the A sounds through the PR40. It's such a gutsy amp....</P>
In our one the Rectifier tube/valve had died and melted down the next component in the chain, it's worth replacing those as well as the cans!</P>
Our reverb was faulty as well, actually distorting because it was putting out too much power! Fixed it since though.</P>
I suspect you'll enjoy the PR40 a whole lot...</P>
-Brendon</P>-1958 Hofner 550 archtop guitar -1959 C3 and PR40- -1964 Busillachio Harmonium- -1964 M101-
-1967ish Leslie 122- -1975 T500 (modded..chopped, and reassembled!)-
-DIY 760 FrankenLeslie/rat hideout- -1980 Electrokey Electric Piano- -Yamaha electric Harmonium (early 80's?)-
-1990 Jansen GMF150 amp- -1992 Korg 01W/fd- -1992 G&L S-500 geetar.
Comment