Lowery Celebration LX 600 "Draw Bar" Help Needed

[loveorganmusic]

I have one instruction manual for this organ and it mentions a draw bar feature. It says how to adjust the lower flutes volumes and that worked for me. The upper 9 draw bars ( flutes) are adjustable from what I've discovered but how to save them? As this organ is set up now ( I got it used) the Upper 16 and 8 flutes are way louder than the 4, 2 and higher.

I like this organ so far but for what it cost new back in the day, you'd think a few more pages in the manual wouldn't cut the profit that much.

Any advice on how to save the Upper flutes volume settings, if possible, is appreciated? A grocery store receipt usually has more information than any manual now days. . .

[andyg]

Not sure if we've got any LX Celebration owners on here to answer that. If no-one can help here, then your best bet is to sign up at the Lowrey Forum and ask there: https://groups.io/g/lowreyforum/topics

If the flutes are so out of balance, it sounds like the previous owner has adjusted things to their liking. Look in the owners manual for the reset procedure that will set things back to factory fresh. It's usually a combination of holding down a few keys when switching on the power but I seem to recall that the previous NT series had a dedicated reset button hidden away under the keyboards, near the headphones socket.

[loveorganmusic]

I just noticed your reply. I thought I'd get an email notifying me of replies. Oh well.
Thank you for your advice.