Forum Top Banner Ad

Collapse

Ebay Classic organs

Collapse

Announcement

Collapse
No announcement yet.

Allen 600 series capture memory problem

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Allen 600 series capture memory problem

    Can anyone help me? Organ at our small church with no money I'm trying to help. The capture memory on this 600 series Allen organ suddenly quit. Is there a "usual" problem or part that goes goes out that someone know something about?

    Jamie
    [email protected]

  • #2
    There is usually a large power supply to provide the stop magnet power supply, and it has a power switch on it, and probably a circuit breaker. See if the supply accidentally got switched off or if the circuit breaker tripped.

    Comment


    • #3
      If it's the memory that doesn't hold, look for a 5 volt power supply containing 4 D size NiCad cells. It will be a black cage about 6x6x6 inches. Check that it is outputting 5 volts DC.
      td
      Servicing electronic organs since 1969.

      Comment


      • #4
        The NAR sequential capture actions, if that is what his one has, would occasionally freeze. The "reset" to awaken that system was press and hold the set button, then press the cancel button, then release both.

        Comment

        Working...
        X