No, those are capacitors. IC1 & 2 are the rectangular objects to the right of your circles.
For now just make sure the board is getting...
There are no conversations in this channel.
Please log in to your account to view your subscribed posts.
| Topics | Statistics | Last Post | ||
|---|---|---|---|---|
|
5 responses
159 views
4 likes
|
by circa1949
03-11-2024, 03:05 PM
|
|||
|
Closed, Sticky:
Viscount US Technical Support
|
4 responses
4,196 views
2 likes
|
04-13-2017, 02:37 PM
|
||
|
Closed, Sticky:
Making PCBs
|
20 responses
16,366 views
3 likes
|
by DDallman
08-20-2015, 04:38 PM
|
||
|
0 responses
5,975 views
1 like
|
by andyg
05-06-2013, 11:53 AM
|
|||
|
4 responses
60 views
0 likes
|
by tucsondave
08-27-2024, 05:26 AM
|
|||
|
11 responses
86 views
0 likes
|
08-24-2024, 05:46 PM
|
|||
|
4 responses
30 views
0 likes
|
by Monarke
08-24-2024, 07:14 AM
|
|||
|
11 responses
85 views
0 likes
|
by andyg
08-21-2024, 01:06 PM
|
|||
|
235 responses
1,786 views
2 likes
|
by adamsih300u
08-18-2024, 04:39 PM
|
|||
|
Redirect:
Wurlitzer 4572 tabs not working
|
— | — | ||
|
12 responses
98 views
0 likes
|
by samarkandy
08-14-2024, 01:20 PM
|
|||
|
20 responses
139 views
0 likes
|
by tucsondave
08-14-2024, 08:42 AM
|
|||
|
0 responses
31 views
1 like
|
08-11-2024, 09:45 AM
|
|||
|
5 responses
67 views
0 likes
|
by tucsondave
08-11-2024, 05:23 AM
|
No topics found.
-
09-08-2024, 06:25 AM
-
Reply to Rodgers 950 Sound? issueEither excessive voltage, or, if they are electrolytic, installed backwards (wrong polarity).09-09-2024, 01:36 PM -
Reply to Rodgers 950 Sound? issuePerhaps, but if the voltage was way too high, it would have fried a bunch of components. It's more likely the capacitors were installed backwards, or...09-09-2024, 04:46 PM
-
Reply to Rodgers 950 Sound? issueI asked the caretaker, and she said she would see if she could find the blown capacitors. Something she had not told me before was that the caps that...09-11-2024, 08:12 AM
-
The divider board is the third one from the left with the 5 IC's on it.
You will have to use the diagram to determine which pins on the IC's are...09-09-2024, 07:28 AM