Help with Hauptwerk

[Mikhaly]

Hi,

Someone would know what settings are needed to correct the response key reversal in Hauptwerk 4 ?

That is to say by pressing a key, the sound is stopped and releasing it, the sound lasts indefinitly.

The same problem arose in Grandorgue and I found the solution on the internet: In MIDI parameters settings for keyboard, these parameters are needed : Low Velocity = 1 and High Velocity = 0 to correct it.

Where can I do those changes in Hauptwerk 4?

Thank you.

[John Kinkennon]

I am not aware of a way to correct this is Hauptwerk. Sending NoteOn and NoteOff in reverse order is such a fundamental problem that it would seem best to correct the error in keyboard wiring or in the encoder. Many encoder designers would be happy to provide a fix. Other encoders have translation capabilities built in. If that is impractical then I would suggest using a MIDI translator from MIDI Solutions or doing the translation fix in a program such as Bome MIDI Translator.

[j reimer]

it would seem best to correct the error in keyboard wiring or in the encoder.

Yes, certainly. The free MIDI-Ox program (and others, I suspect) will probably also do a clever correction of the problem, but you run the risk of introducing unwanted latency into the system.

John Reimer