Rodgers, Jamestown 100. Power supply & amplifier

[Virgilio89bis]

Good night.
Can you help me with the diagram of a power supply?
It is type 6 of a Rodgers Jamestown 100 organ, and if you can share with me...

[echan42]

I'm repairing this Japanese (100v) Yamaha Electone EL90 with no sound, once I popped the lid it was clear what had to be done, since the damage was quite...

[Geremia]

Similar to what Ed reported here, the key power switch and power supply of our 550 watt Rodgers E330TM burned out. The 1.6 amp slow-blow fuse was also...

[moller3x]

After reading many posts about power supply issues in early 1990s Viscount organs, I took both power supply boards from my Wurlitzer C-320 to a local...

[dannicdem]

Greetings to the Forum Experts

My latest Leslie project is stuffing a Leslie 925 into a Leslie 330 cabinet with the addition of 925's upper...

[moller3x]

I recently acquired a 90s vintage Wurlitzer badged Viscount small self-contained AGO instrument with full MIDI with hopes of using it to experiment with...

[JessiW]

Hello all,

I'm new to this forum - thank you for accepting me into the group. I have a Gulbransen Palace organ that up til now, has worked...

[VikeMaleri]

Ok so I have an M-3 with the Field Coil magnet...I replaced the 2 can capacitors in the amplifier using the appropriate values of new radial lead capacitors....

[kbrandt01]

I am restoring a Leslie 700 tone cabinet for a friend. I am not an electrical tech but have done enough of this. My first problem, on the power supply,...

[Bruise in the Muttastery]

Hiyarrrooooooooo,

I find myself in need of a replacement for the 15V Power Supply board/box in my Allen ADC-4000. Does anyone know of...

[fasote]

Good Afternoon All

Hope this new year brings us all some very good things..

Have finally snipped all the wires in my old...

[RobW]

We have a Rodgers Concord 755 (at home) that has experienced several power supply failures. The Rodgers tech has replaced the same resistor three times...

[Brendon Wright]

I'm building an effect into a T500 which requires four rails: +/- 15V and +/-12.

The schematic for the power supply is this here:
...