spinet vs full size console key combs to refurbish manuals

[snacks]

I've ended up with a handful of spare key combs over the years - some are marked as coming from M3s and others from M100s. aside from the little short ones at the bottom of the manuals, would any of these be usable in a worn-out set of -3 manuals? I understand the up and down stop felts are worth replacing as well while you've got everything apart.

[Acetone]

The up and downstop felts are long strips, availsble from specialist dealers as replacement. The key comb felts are small rectagles, keeping the keys from side movement, and I‘ve not yet seen a supplier or refurbishment service for them. If your leftovers are better than what‘s in your organ right now, I suggest a swap. In any case, keep the spare ones :)

Acetone

[snacks]

so there's no difference in dimensions or anything that would prevent the use of key combs from an M100 (or any console with "diving board" keys) in a standard full-size set of manuals?

[Acetone]

Oeps, good question. I do NOT know whether you can mix combs for waterfall keys with combs for diving board keys.

A.

[snacks]

I actually just spoke to a tech today while asking about some other things - he said they're all the same except for the short ones on spinet manuals. So that should be that!